Four ways to fully clean your kitchen, decontaminate and keep it clean without any dead ends

When we cook in the kitchen, there is always a lot of oil pollution. Although there are exhaust hoods nowadays, oil contamination can't be avoided completely, exhaust hoods, cabinets, floors, walls and other kitchen corners can be contaminated with oil. Cleaning is very difficult and disgusting but if we know how to do it well, it is easy to get rid of the dirt and clean it,kitchen scrubber manufacturer today I will tell you some tips about cleaning.

No. 1: Cleaning of Cabinet Oil Stains

The sink is the place on the cabinet where oil is most likely to stick, because we have to wash dishes and pots in it, and it will inevitably get dirty. Cleaning sink, first in the oil stained heavy place sprinkle a little salt particles, and then use the waste plastic wrap wipe warm water to clean the dirty place, it is easy to clean. If the faucet is dirty, use toothpaste to wipe on the line. Cabinet countertops should always wipe clean, always keep clean.

No. 2: kitchen appliances cleaning

Kitchen life appliance business produces the most dirty than we are the range hood, if it is through their own cleaning production hood, then students can best not because of easy disassembly, in case of improper disassembly method affects the use of the whole range hood in China, but also need to spend money again to buy. Cleaning time, must always remember to disconnect, and do not develop towards the machine spray water, any one of the electrical appliances are afraid of moisture, in the oil stains heavier place sprayed with a special oil cleaner, let it sit for about 5 minutes time, and then wipe with a wet and dry rag, can be more easily to wipe the oil clean.

No. 3: cookware cleaning

Probably the dirtiest and grimiest part of your kitchen utensils is the cutting board, which is also closely related to the health of our cooking, so it must be cleaned. To do this, you can put about 200 ml of warm water in a bottle and add 2 tablespoons of vinegar and leave it for 15 minutes. Use this liquid to clean the surface of the cutting board, disinfect it and remove dirt and odors. Once the cutting board is cleaned, it is best to scald the surface with boiling water and then dry it in the sun.

No. 4: Wall and floor cleaning

Kitchen walls and floors are also the most prone to get dirty, especially the tiled ones, the crevices are full of oil. The method of cleaning is to pour some vinegar on the floor, and then mop the floor with a mop, so that the oil and dirt on the floor can be quickly cleaned up, and at the same time, the floor can also play a protective role. The same goes for cleaning the walls. Wipe the walls with a rag soaked in vinegar and it's clean.