The way to make the cleaning sponge dry faster

Sponge factory teaches you how to make the  cleaning sponge dry faster.

Sponge in the use of the role is everyone we should know, but because you know learn how to develop to make the enterprise this kind of product dry faster? cellulose sponge factory Below by the toolkit sponge manufacturers to inform you how to make the clean production sponge dry the more accelerated approach.

1, clean the board and sponge, and confirm that it is dry and flat without bumps.

2. Use a soft brush to apply glue evenly on the base plate and  packaging sponge. Be sure to be even, not too thick, a thin layer is good.

3. Will be coated with good glue with substrate and sponge stand, dry and ventilated for 3 to 5 minutes after the appearance of touching hands do not touch your hands.

4. Repeat steps 2 to 3. that is, apply glue in two parts, is conducive to increasing adhesion, give full play to the role of the substrate and sponge.

5. from the end of the base plate for the paste sponge, can use a clean white paper or straightedge to assist the enterprise lateral paste, in order to prevent the emergence of bubbles and hollow drums, with two thumbs from the middle of the development of the two sides at the same time we force the direction of the extrusion, move the white paper and straightedge at an average speed of slow march.

6. in the packaging sponge in accordance with the above steps to paste the rubber skin

Sponge is a porous material, absorbent, can be used to clean things. People commonly used cleaning sponge made of lignocellulosic fibers or foam polymers. When a sponge encounters water, it becomes wet. What we have to do is to squeeze the water out of it and put it in a ventilated center to dry.